KEY IN CODE "PAINT10" FOR 10% OFF AND FREE DELIVERY (ABOVE $100)!
Excludes Professional Painting Service, Painting Tools & Spray Paint.
Aqua Primer Sealer Undercoat
Aqua Primer Sealer Undercoat is a water-based one step pre-coat formulated with special acrylic polymer for good adhesion on multi-purpose substrates
Aqua Primer Sealer Undercoat
Excellent alkaline and efflorescence resistance
Good coverage and hiding power
Good tannin stain resistance
Chemical barrier to salt migration
Physical barrier to water transport
Excellent penetration on porous substrates
Use This Paint If...
You want to achieve a visibly smoother surface and better-looking result
You do not want to risk your paint flaking or peeling
You want to prevent chalking
Where Can You Use It?
As a multi-substrate sealer for both interior and exterior surfaces such as masonry walls, ceilings, wood, metal and plastic.
Roller or brush
Approx. 10-11 m2 / litre depending on surface texture, substrate porosity and method of application
Surface Dry – 30 minutes at 30°C
Hard Dry – 2 hours at 30°C
Minimum 2 hours under normal conditions
New or unpainted interior and exterior masonry surfaces:
a) Remove all imperfections and sand down for an even surface
b) Remove dust, contaminants or foreign matter with damp cloth
c) Allow surface to dry
Previously painted interior and exterior masonry surfaces:
a) Remove any loose, peeling or flaking paint using scrapper or water jet wash whichever is suitable
b) Repair any imperfections. Fill cracks with suitable water-resistant putty or filler and sand down to an even surface
c) Remove dust, contaminants or foreign matter with damp cloth
d) Remove oil or grease by solvent cleaning or mild detergent. Allow surface to dry
e) If fungus, moss or mould is visible, use Anti-Fungus Solution to treat the affected surface. Leave solution for at least 2 hours
f) Ensure that the previously painted surface is sound
g) If surface has a high gloss or semi-gloss finish, sand to remove the high gloss to enable the new paint to adhere
New or unpainted dressed or raw exterior timber:
a) Remove all imperfections and sand for a smooth surface
b) Fill nail holes with a suitable, exterior grade water-resistant wood filler
c) Remove dust and contaminants
a) Thoroughly degrease and clean new metal surfaces (e.g. galvanized iron) to remove oil or other contaminants using suitable cleaning solvent
b) Allow to dry
For other metal surfaces which has rusted (e.g. mild steel), clean with abrasive cloth to remove rust. Do not use steel wool. Use suitable cleaning solvent to remove traces of impurities and contaminants before applying a coat of suitable primer. Under non-aggressive indoor conditions, the product can be used directly on clean metal surfaces. Otherwise, apply a coat of Crystalux A/C Primer on the well-prepared
a) Thoroughly degrease and clean new surfaces to remove oil or other contaminants using suitable cleaning agent.
b) Light sanding is recommended to enhance adhesion.
Product PDFsTechnical Data Sheet (TDS)
Why Nippon Paint?
Nippon Paint is Singapore's No.1 Paint Brand.
Nippon Paint is one of the most established pioneers in the paint industry with more than 120 years of experience in paint technology.
Nippon Paint strictly complies with local quality, environmental, occupational health and safety, legal and other requirements to ensure highest quality is met.